Description
The FingerTec TA500 CR is a color multimedia fingerprint with RFID reader is equipped with one LCD display, 16 keypads, a speaker, a fingerprint sensor, a USB port for data transfer and an RFID card induction area. The reader has 16 keys, which contain numbers from 0-9, a menu/ok button, an escape button, four directional button (Up, Down, Right & left) and a backspace button.
At the back of the reader, you will find TCP/IP communication port and 12 Volt power port. The USB port is located at the side of the reader. FingerTec TA500CR is able to support RFID cards and MiFare cards upon request.
Model: TA500CR
Surface Finishing : Acrylonitrile Butadiene Styrene
(ABS) & Polycarbonate (PC
Type Of Scanner : Non Coated Optical Scanner
Microprocessor : 360 MHZ
Memory : 128 MB Flash Memory & 16 MB SDRAM
Algorithm : Bio bridge VX 10.0
Dimension (L X W X H), MM : 184 X 38 X 134
Fingerprint Templates : 2000
Cards : Yes
Transactions : 80000
Methods : Fingerprint (1:1, 1:N) / Password / RFID Card
Recommended Fingerprint Per User ID : 2
Fingerprint Placement : Any Angle
Verification Time (Sec) : < 1
FAR (%) : < 0.0001
FRR (%) : < 1
RFID: 64-Bit, 125KHz, RF Output Power (EN300-330)
: Made to order
Method : TCP/IP, USB DISK
Temperature (°C) : 0 ~ 45
Humidity (%) : 20 ~ 80
Power Input : 12VDC1.5A
Greeting voice : Yes
Display : 2.8″ 3K Colour TFT Screen
Short Messaging : Yes
Internal Backup Battery : Yes (2-Hours Working,
4-Hours Standby)
What’s In the Box: 1 X FINGERTEC TA500CR, 1 x Manual Instruction, 1 x Cable Kit, 1 x 5V2A Adapter
Reviews
There are no reviews yet.